電動自行車用鋰電池保護IC,用于5~10節Li-ion保護IC BQ29500.
Bq29500 information:
Protect for 5-10 series Li-ion Battery
Balance function
With I2C interface
10-series Li-ion Battery Protect IC BQ29500.
全部回復(20)
正序查看
倒序查看
BQ77PL900,5至10節鋰離子電池保護和AFE.
說明
The bq77PL900 is a five to ten series cell lithium-ion battery pack protector. The integrated I2C communications interface allows the bq77PL900 also to be as an analog front end (AFE) for a Host controller. Two LDOs, one 5 V/25 mA and one 3.3 V/25 mA, are also included and may be used to power a host controller or support circuitry.
The bq77PL900 integrates a voltage translation system to extract battery parameters such as individual cell voltages and charge/discharge current. Variables such as voltage protection thresholds and detection delay times can be programmed by using the internal EEPROM.
The bq77PL900 can act as a stand-alone self-contained battery protection system (stand-alone mode). It can alternatively be combined with a host microcontroller to offer fuel gauge or other battery management capabilities to the host system (host-control mode).
The bq77PL900 provides full safety protection for overvoltage, undervoltage, overcurrent in discharge, and short circuit in discharge conditions. When the EEPROM programmable safety thresholds are reached, the bq77PL900 turns off the FET drive autonomously. No external components are needed to configure the protection features.
The analog front end (AFE) outputs allow a host controller to observe individual cell voltages and charge/discharge currents. The host controller’s analog-to-digital converter connects to the bq77PL900 to acquire these values.
Cell balancing can be performed autonomously, or the host controller can activate it individually via a cell bypass path integrated into the bq77PL900. Internal control registers accessible via the I2C interface configure this operation. The maximum balancing bypass current is set via an external series resistor and the internal FET-on resistance (typically 400 ). Optionally, external bypass cell balance FETs can be used for increased current capability.
APPLICATIONS
Cordless Power Tools
BQ78PL114,具有PowerPump電池平衡的PowerLAN 網關電池管理控制器,
APPLICATIONS
Mobility Devices (E-Bike)
以上BQ77PL900可以免費索取評估板
新曄電子有限公司 Serial Microelectronic
新曄電子(香港)有限公司上海公司
Tel :021-54667999
M:13501671126
johnson.fan@serialmicro.com.cn
colin.chen@serialmicro.com.cn
Contact:樊 健/陳磊
新曄電子(香港)有限公司蘇州公司
0512-67626852
johnson.fan@serialmicro.com.cn
Contact:樊 健/陳磊
新曄電子(香港)有限公司深圳公司
Tel :0755-8366 3686
M:13632937302
wenny.luo@serialmicro.com.cn
Contact:羅文亮/邵新華
667281221072072.pdf 667281221072316.pdf
說明
The bq77PL900 is a five to ten series cell lithium-ion battery pack protector. The integrated I2C communications interface allows the bq77PL900 also to be as an analog front end (AFE) for a Host controller. Two LDOs, one 5 V/25 mA and one 3.3 V/25 mA, are also included and may be used to power a host controller or support circuitry.
The bq77PL900 integrates a voltage translation system to extract battery parameters such as individual cell voltages and charge/discharge current. Variables such as voltage protection thresholds and detection delay times can be programmed by using the internal EEPROM.
The bq77PL900 can act as a stand-alone self-contained battery protection system (stand-alone mode). It can alternatively be combined with a host microcontroller to offer fuel gauge or other battery management capabilities to the host system (host-control mode).
The bq77PL900 provides full safety protection for overvoltage, undervoltage, overcurrent in discharge, and short circuit in discharge conditions. When the EEPROM programmable safety thresholds are reached, the bq77PL900 turns off the FET drive autonomously. No external components are needed to configure the protection features.
The analog front end (AFE) outputs allow a host controller to observe individual cell voltages and charge/discharge currents. The host controller’s analog-to-digital converter connects to the bq77PL900 to acquire these values.
Cell balancing can be performed autonomously, or the host controller can activate it individually via a cell bypass path integrated into the bq77PL900. Internal control registers accessible via the I2C interface configure this operation. The maximum balancing bypass current is set via an external series resistor and the internal FET-on resistance (typically 400 ). Optionally, external bypass cell balance FETs can be used for increased current capability.
APPLICATIONS
Cordless Power Tools
BQ78PL114,具有PowerPump電池平衡的PowerLAN 網關電池管理控制器,
APPLICATIONS
Mobility Devices (E-Bike)
以上BQ77PL900可以免費索取評估板
新曄電子有限公司 Serial Microelectronic
新曄電子(香港)有限公司上海公司
Tel :021-54667999
M:13501671126
johnson.fan@serialmicro.com.cn
colin.chen@serialmicro.com.cn
Contact:樊 健/陳磊
新曄電子(香港)有限公司蘇州公司
0512-67626852
johnson.fan@serialmicro.com.cn
Contact:樊 健/陳磊
新曄電子(香港)有限公司深圳公司
Tel :0755-8366 3686
M:13632937302
wenny.luo@serialmicro.com.cn
Contact:羅文亮/邵新華
667281221072072.pdf 667281221072316.pdf
0
回復
@johnson_fan
BQ77PL900,5至10節鋰離子電池保護和AFE.說明Thebq77PL900isafivetotenseriescelllithium-ionbatterypackprotector.TheintegratedI2Ccommunicationsinterfaceallowsthebq77PL900alsotobeasananalogfrontend(AFE)foraHostcontroller.TwoLDOs,one5V/25mAandone3.3V/25mA,arealsoincludedandmaybeusedtopowerahostcontrollerorsupportcircuitry.Thebq77PL900integratesavoltagetranslationsystemtoextractbatteryparameterssuchasindividualcellvoltagesandcharge/dischargecurrent.VariablessuchasvoltageprotectionthresholdsanddetectiondelaytimescanbeprogrammedbyusingtheinternalEEPROM.Thebq77PL900canactasastand-aloneself-containedbatteryprotectionsystem(stand-alonemode).Itcanalternativelybecombinedwithahostmicrocontrollertoofferfuelgaugeorotherbatterymanagementcapabilitiestothehostsystem(host-controlmode).Thebq77PL900providesfullsafetyprotectionforovervoltage,undervoltage,overcurrentindischarge,andshortcircuitindischargeconditions.WhentheEEPROMprogrammablesafetythresholdsarereached,thebq77PL900turnsofftheFETdriveautonomously.Noexternalcomponentsareneededtoconfiguretheprotectionfeatures.Theanalogfrontend(AFE)outputsallowahostcontrollertoobserveindividualcellvoltagesandcharge/dischargecurrents.Thehostcontroller’sanalog-to-digitalconverterconnectstothebq77PL900toacquirethesevalues.Cellbalancingcanbeperformedautonomously,orthehostcontrollercanactivateitindividuallyviaacellbypasspathintegratedintothebq77PL900.InternalcontrolregistersaccessibleviatheI2Cinterfaceconfigurethisoperation.ThemaximumbalancingbypasscurrentissetviaanexternalseriesresistorandtheinternalFET-onresistance(typically400).Optionally,externalbypasscellbalanceFETscanbeusedforincreasedcurrentcapability.APPLICATIONSCordlessPowerToolsBQ78PL114,具有PowerPump電池平衡的PowerLAN網關電池管理控制器,APPLICATIONSMobilityDevices(E-Bike)以上BQ77PL900可以免費索取評估板新曄電子有限公司SerialMicroelectronic新曄電子(香港)有限公司上海公司Tel:021-54667999M:13501671126johnson.fan@serialmicro.com.cncolin.chen@serialmicro.com.cnContact:樊健/陳磊新曄電子(香港)有限公司蘇州公司0512-67626852johnson.fan@serialmicro.com.cnContact:樊健/陳磊新曄電子(香港)有限公司深圳公司Tel:0755-83663686M:13632937302wenny.luo@serialmicro.com.cnContact:羅文亮/邵新華667281221072072.pdf667281221072316.pdf
哈哈,
本人正在打PCB做評估認證工作,希望和大家一起交流學習1
本人正在打PCB做評估認證工作,希望和大家一起交流學習1
0
回復
